Hello #UTTU CAD# is. <<<__TRANS_SPLIT__>>> #UTTU CAD#

Notice regarding the v.2.0 update (1) Added preview function to Windows Explorer and Open Window

<Windows Explorer - Preview>

① File – Open - *UTTU, *ubk

- You can view the selected file in the preview in Open Pattern.

(Note: Preview is only available for files saved in v2.0.)

(2) Added a feature to register and use grading-applied patterns

<Register/Apply Rule Library>

① Grading Mode – Register Rule Library – Select Pattern and Right-click – Apply

- Select the pattern to register and right-click the mouse; the location of each grading point will appear as a number.

- The grading data is applied sequentially according to the order (number) of these numbers. <<<__TRANS_SPLIT__>>> - When registering a rule library, if the size differs from the size currently being worked on (current window is size 5, registration is size 4), a notification pop-up window will appear.

- If the size systems differ, modify the pattern's grading information and save it.

② Grading Mode – Apply Rule Library – Check library list and select pattern – Select option (Pattern/Point) and then select Pattern (Point)

- When loading a library, if it does not match the size list currently being worked on, a confirmation pop-up window will appear.

- By default, the number of grading points must match for the library's data values to be accurately applied to the pattern. <<<__TRANS_SPLIT__>>> - Even if the number of points differs, the location of each point in the library is automatically applied to match the corresponding point on the pattern.

- If you select the 'Point' option, you can selectively apply the grading values of specific points stored in the library only to the desired point(s).

(3) Added a feature to create arc-shaped curves between lines

<Rounded Corners>

① Draw – Rounded Corners – Select Line – Select Another Line – Enter Radius Value and Apply

- The endpoint (indicated in red) of the selected straight line/curve becomes the reference point.

- The direction of the reference points must be the same.

- Create rounded corners by entering the radius value.

(4) Added a function to fold the pattern based on two points on the outline or unfold the pattern based on a straight line on the outline.

<Folding Pattern>

① Pattern – Fold – Select two points on the outline – Select continuous line to fold

- You can select the outline based on the two selected points.

- The selected outline is folded inward.

② Pattern – Fold – Option: Remove Inner Line – Select Baseline to Unfold – Select Continuous Line to Unfold

- Unfolds the folded line (Option: Remove Inner Line) by deleting the inner line.

- Unfolds the folded line (Option: Keep Inner Line) while keeping the inner line.

(5) Added feature to take multiple photos using a webcam and create patterns (Available for Pro or higher)

<Ditto Auto>

① Special Features – Ditto Auto – Settings – Camera Settings

- Ditto Before running Auto, select the shooting camera in Settings.

- Capture the Dittoboard and the pattern using the Photo button.

(You can conveniently take continuous shots with the configured device.)

- Press the Apply button to automatically load only the pattern onto the screen.

- You can continuously capture and load patterns.

(6) Allows length/distance measurement data to be displayed as text and perform arithmetic operations

<Length/Distance>

① Draw – Length – Select Line(s) – Right-click

- The length values of the selected line(s) are displayed on the canvas.

② Length/Distance - ‘+’ – Select Measurement Value 1 and 2 respectively – Right-click – Display Length Value

- Clicking the values marked on the floor for ‘+’ or ‘-’ displays the calculated values.

- Clicking ‘*’ or ‘/’ displays multiplication/division values for individual numbers, such as ×2 (or /2), ×3 (or /3), etc.

- Pressing delete while selected deletes all measurement values.

(7) Modifying Pattern Information

① Drawing - Select (Filter: Pattern) – Select Pattern

- When a pattern is selected, it is displayed in the Pattern Information window.

- When a pattern is selected in the Pattern Information window, a dotted line appears around the selected pattern.

- You can select multiple patterns within the Pattern Information window and move their positions using Shift. <<<__TRANS_SPLIT__>>> - You can immediately modify the name by simply entering text after selecting a pattern.

- After modifying the name, pressing Enter allows you to immediately change the names in the list at the bottom consecutively.

(8) Added a feature to rotate the pattern to seq center/default alignment.

<Seq Center Alignment>

① Pattern – Seq Center Alignment (Option: Center Alignment)

- When seq center aligning, the seq is displayed in the center of the pattern.

② Pattern – Center Sequence Alignment (Option: Default Alignment)

- The arrow direction of the sequence displayed in the pattern is upward (default direction).

- When centering a pattern with a downward sequence (option: default alignment), the top and bottom of the pattern are reversed according to the sequence's default direction, and the sequence is displayed in the center.

(9) Improved ability to move a certain length using arrow keys

<Arrow Keyboard>

① Select – Point (Line) – Select Point - Move Right with Arrow Key – Move by the value entered in the grid

- After selecting a point/line/pattern, you can move it by the set length using the arrow keys.

- The set length can be changed numerically in the grid filter.

(10) Added new symbol types and improved the ability to apply set values.

<Symbol>

① Drawing - Symbol – Wavy Line/Zigzag

- You can apply the width for wavy lines and zigzags.

② Drawing - Symbol – Button/Buttonhole

- The position of buttons/buttonholes has been changed to the left.

- You can select and apply the shape of the button.

③ Drawing – Symbols - Diagonal Stitch

- Diagonal Stitch (Leather Stitch) has been added to the Symbols menu.

- When a center line is included, the diagonal stitch is displayed along with the center line.

(11) Enhanced to activate the previously used tool when pressing the Space Bar

<Space Bar>

① Rectangle – Modify – Space bar

- Executes the previous step's task when the Space bar is pressed

(12) Shortcut keys changed from a single key press to two

- Shortcut keys are now entered using two keys.

- When a single digit is entered, it is displayed at the bottom; when two digits are entered, it is executed.

- A window has been added to check applied shortcut keys.

Please refer to the manual for detailed explanations of each function.

Go to Manual

*** #UTTU CAD#

Automatic updates

are available upon login. ***

※ The UTTU CAD Personal version has the following differences from the Pro version.

<Personal Version> - Grading saving function is limited. - Watermarks are automatically inserted on the canvas.

- Float output is limited to 10 patterns at a time.

<Pro Version>

- The Pro version adds Ditto Auto and Spooler functions.

We will always do our best to provide a better program.

Thank you.

<Pro 버전>

- Pro버전은 디토 오토와, 스풀러 기능이 추가됩니다.

더욱 나은 프로그램을 제공하기 위해 항상 최선을 다하도록 하겠습니다.

감사합니다.